1. The appearance should meet the following table:
Color: The color of each raw material is the same, no obvious color difference
Stains: The appearance of the gown should be dry, clean, free of mildew and stains
Deformation: No surface defects such as adhesion, cracks, holes, etc.
Tip: The surface must not have a tip longer than 5mm
2,Impermeability: The hydrostatic pressure of key parts should not be lower than 1.67 KPA (17 cmH2O).
3,Surface moisture resistance: The water level on the outer side should not be lower than level 3.
4,Breaking strength: The breaking strength of the material in the key parts should not be lower than 45N.
5, Elongation at break: The elongation at break of key materials should not be less than 15%.
6, Elastic band: no gap, no break, can rebound after stretching.
【Scope of application】:This product is used for general isolation in the clinics, wards, and test rooms of medical institutions.
【Contraindications】: No contraindications have been found for this product.
1. Please select and confirm the type and specification of the gown before use.
2. Choose the specifications that suit you according to your figure
3. Put on the isolation clothing to ensure that the placket is closed intact. Then decide whether to wear other protective equipment.
1. Please check whether the packaging is intact before use, and confirm the packaging mark, production date and expiration date. Use within the expiration date, the packaging is damaged, and it is forbidden to use.
2. Before taking off the protective gloves, try to avoid touching the outer surface of the gown. After taking off the gloves, try to contact the inner surface of the gown. After removing the gown, the inner surface should face outward, and the outer surface and the pollutants should be wrapped Inside, to avoid contact of pollutants with the human body and the environment, the protective equipment to be removed must be handled in a concentrated manner to avoid expanding pollution in the process.
3. This product should be used by professionals; non-professionals should not use this product to avoid accidents.
4. This product is limited to one-time use and destroyed after use.